General & Model Specific Technical Forums > Twin Cam

Twin Cam Sticky Topics List (updated 2/17/2013)

(1/1)

Coyote:
Harley Parts Lookup:

* Online Parts Fiche LookupGeneral TC Engine:

* SE 22868-00 forged pistons
* HD TC Heads: Flow Bench Study
* TC Intake HeadFlow Study PDF version link
* singh groove
* HD now has Hydra chain conversion kit!
* Andrews cam 21 vs 26
* oil cooler question
* buying aftermarket a OIL FILTER??
* Auto Store Oil Filter  
* Anyone ever use a spark plug from an autoshop?  
* Which brand of spark plugs for knock retard to work?
* NKG vs Harley plugs
* o-rings and such: Mcmaster-carr
* Dual Plugs in a TWIN CAM?   
* "Quiet down valvetrain noise" ...by using thicker oil?  
* Baisley LMR-002 Spring 
* Baisley oil bypass spring install  
* Axtell Oil bypass system  
* Zippers Hydraulic Cam Chain Tensioners  
* SE non roller 1.7 rockers  
* Higher ratio rockers  
* Consensus on SE 1.725:1 Rocker Arms?  
* -06 head castings besides Mercury Marine who else made them?  
* CAMS and CCP? Intake Side:
* Bigger is not better - Throttle Body that is.....
* HOW BIG OF TB DO YOU NEED FOR YOUR MOTOR? INFO HERE.......part 1
* Matching your TB to your heads part 2
* Big throttle bodies don't work that well on mouse motors
* Carb shoot out 1: CV40, CV51, HSR45, HSR48, Super "E", "G", and "D" (by B Woltz)
* Carb shoot out 2: CV51, Woods 505 (by B Woltz)
* Carb Shoot Out 3: CV40, CV44, HSR42, HSR45 (by B Woltz) 

* Throttle body headflow numbers Exhaust Side:
* Which 2-2 are as good or better than a 2-1?
* testing 1-2-3: exhaust reversion
* ..."Over Exhausting".....? General TC primary and transmission:
* Clutch Spring Color codes
* Clutch adjustment, which is better 1/2 turn or 1 full turn?
* Index of 3.37 final gearing discussions
* How to gear down 2012 Heritage?
* SE Compensator?
* shift shaft seal General How To threads:
* Rocker Box Drain Holes
* Super Trapp/ Propipe conversion
* Pro pipe baffle modifaction   
* oil mist out the breather
* How to bypass breather tubes on SE backing plate
* venting the heads to the ground...any benefit?
* SE Backing Plate Breather Mod
* Vent breather rig
* DIY Twin Cam Top End General EFI TC (more detailed threads located in the tuning section):
* New Bike (is retuning needed for pipes/AC, and mufflers)
* True duals/remap efi? 
* Does the ECU in a 07 FXST support ACR's?
* What is the Correct Injector Size for a 103"? Touring Bike Info:
* Touring year updates for Twin Cam
* 120R Question
* New SE 120" motor
* What is the best TD for a bagger
* ( 2000 FLHTCUI) Belt to chain, how wide can I go?? 
* Air shock rubber boot replacement
* '07-'08 Touring: Looking for 68T rear pulley for 1" belt  Touring How To threads:
* Does your bagger handle like a drunken camel in a sand storm?
* Installing 07-08 bunged V&H true dual pipes on a 2002 Roadking
* installing '07-'08 true duals head pipes (with o2 bungs) on a pre '07 bagger
* stock HD '09 2-1-2 touring pipe conversion to an '02 Bagger
* oil cooler install
* Rear shock oil change on a bagger. 
* I converted from MM to carb   
* TC MM FI to Carb Conversion 
* Replace Circuit Breaker with 40 amp Fuse * added 2/17/13
* added 3/12/13


if anyone knows of a thread, or sees a new thread, that should be added to this list, please PM mayor with a link.  I will review the thread and if it seems to be a good sticky topic I will add it to my bookmarks to be added on the next update to this sticky.

Navigation

[0] Message Index